316L 6 * 0.8mm RVS coiled buizen
Koarte beskriuwing:
316 Stainless Steel Coiled Tubing Spesifikaasje
FYSIKE EIGENSKIPPEN
Opbringststerkte: ≥40.000 psi
Treksterkte: ≥70.000 psi
Maksimum hurdens: 200HV
GEMYSKE GEARSTALLING-%
Koalstof ≤0,030
Mangaan ≤2.00
Fosfor ≤0,045
Sulver ≤0,030
Silisium ≤0,75
Chromium 16.0-18.0
Nikkel 10,0-14,0
Molybdenum 2.00-3.00
Tube Body Load:
Yield & Tensile Minimums berekkene op Spesifisearre Wall.
Hydrostatyske testdruk:
Alle foltôge coiled tubing snaren wurde hydrostatyske druk hifke foarôfgeand oan shipping.The hydrostatic test druk sil wêze minder fan 90% fan de teoretyske burst opbringst sterkte of 17.500 psi of 120700 kpa (útsein as spesifyk ôfpraat tusken keaper en fabrikant).
Ynterne opbringst: Ynterne druk oan
oarsaak opbringst mei help fan Minimum Yield
Sterkte en minimale muorre dikte.
Maksimum wurkdruk is in funksje fan buiskondysje en wurdt bepaald troch de brûker.
Koppelwearden berekkene mei minimale muorredikte en minimale opbringststerkte.
Oare grutte / muorre dikte beskikber op oanfraach.
Boppesteande gegevens binne foar nije buizen by oantsjutte minimale sterkte.
Gemyske gearstalling tafel fan roestfrij stiel materiaal
| A312 GRADES | UNS | C | Mn | P | S | Si | Cr | Ni | Mo | Ti | Nb | N |
| TP304 | S30400 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-11.0 | ||||
| TP304L | S30403 | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-13.0 | ||||
| TP304H | S30409 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-11.0 | ||||
| TP304N | S30451 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-18.0 | 0,10-0,16 | |||
| TP304LN | S30453 | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-12.0 | 0,10-0,16 | |||
| TP309S | S30908 | 0.08 | 2 | 0.045 | 0.03 | 1 | 22.0-24.0 | 12.0-15.0 | 0,75 | |||
| TP309H | S30909 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 22.0-24.0 | 12.0-15.0 | ||||
| TP309Cb | S30940 | 0.08 | 2 | 0.045 | 0.03 | 1 | 22.0-24.0 | 12.0-16.0 | 0,75 | 10xC min | ||
| 1.10 max | ||||||||||||
| TP309HCb | S30941 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 22.0-24.0 | 12.0-16.0 | 0,75 | 10xC min | ||
| 1.10 max | ||||||||||||
| TP310S | S3108 | 0.08 | 2 | 0.045 | 0.03 | 1 | 24.0-26.0 | 19.0-22.0 | 0,75 | |||
| TP310H | S3109 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 24.0-26.0 | 19.0-22.0 | ||||
| TP310Cb | S31040 | 0.08 | 2 | 0.045 | 0.03 | 1 | 24.0-26.0 | 19.0-22.0 | 0,75 | 10xC min | ||
| 1.10 max | ||||||||||||
| TP310HCb | S31041 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 24.0-26.0 | 19.0-22.0 | 0,75 | 10xC min | ||
| 1.10 max | ||||||||||||
| TP316 | S3160 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |||
| TP316L | S31603 | 0.035 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | |||
| TP316H | S31609 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |||
| TP316Ti | S31635 | 0.08 | 2 | 0.045 | 0.03 | 0,75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 5x | 0.1 | |
| (CN) | ||||||||||||
| -0.7 | ||||||||||||
| TP316N | S31651 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0,10-0,16 | ||
| TP316LN | S31653 | 0.035 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | 0,10-0,16 | ||
| TP317 | S3170 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 10.0-14.0 | 3.0-4.0 | |||
| TP317L | S31703 | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | |||
| TP321 | S3210 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | 0.1 | |||
| TP321H | S32109 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | 0.1 | |||
| TP347 | S3470 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | ||||
| TP347H | S34709 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | ||||
| TP347LN | S34751 | 0,05-0,02 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | 0.20- | 0,06-0,10 | ||
| 50 | ||||||||||||
| TP348 | S3480 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | ||||
| TP348H | S34809 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | ||||
316 Stainless Steel Coiled Tubing Spesifikaasje
FYSIKE EIGENSKIPPEN
Opbringststerkte: ≥40.000 psi
Treksterkte: ≥70.000 psi
Maksimum hurdens: 200HV
GEMYSKE GEARSTALLING-%
Koalstof ≤0,030
Mangaan ≤2.00
Fosfor ≤0,045
Sulver ≤0,030
Silisium ≤0,75
Chromium 16.0-18.0
Nikkel 10,0-14,0
Molybdenum 2.00-3.00
Tube Body Load:
Yield & Tensile Minimums berekkene op Spesifisearre Wall.
Hydrostatyske testdruk:
Alle foltôge coiled tubing snaren wurde hydrostatyske druk hifke foarôfgeand oan shipping.The hydrostatic test druk sil wêze minder fan 90% fan de teoretyske burst opbringst sterkte of 17.500 psi of 120700 kpa (útsein as spesifyk ôfpraat tusken keaper en fabrikant).
Ynterne opbringst: Ynterne druk oan
oarsaak opbringst mei help fan Minimum Yield
Sterkte en minimale muorre dikte.
Maksimum wurkdruk is in funksje fan buiskondysje en wurdt bepaald troch de brûker.
Koppelwearden berekkene mei minimale muorredikte en minimale opbringststerkte.
Oare grutte / muorre dikte beskikber op oanfraach.
Boppesteande gegevens binne foar nije buizen by oantsjutte minimale sterkte.
Gemyske gearstalling tafel fan roestfrij stiel materiaal
| A312 GRADES | UNS | C | Mn | P | S | Si | Cr | Ni | Mo | Ti | Nb | N |
| TP304 | S30400 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-11.0 | ||||
| TP304L | S30403 | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-13.0 | ||||
| TP304H | S30409 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-11.0 | ||||
| TP304N | S30451 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-18.0 | 0,10-0,16 | |||
| TP304LN | S30453 | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-12.0 | 0,10-0,16 | |||
| TP309S | S30908 | 0.08 | 2 | 0.045 | 0.03 | 1 | 22.0-24.0 | 12.0-15.0 | 0,75 | |||
| TP309H | S30909 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 22.0-24.0 | 12.0-15.0 | ||||
| TP309Cb | S30940 | 0.08 | 2 | 0.045 | 0.03 | 1 | 22.0-24.0 | 12.0-16.0 | 0,75 | 10xC min | ||
| 1.10 max | ||||||||||||
| TP309HCb | S30941 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 22.0-24.0 | 12.0-16.0 | 0,75 | 10xC min | ||
| 1.10 max | ||||||||||||
| TP310S | S3108 | 0.08 | 2 | 0.045 | 0.03 | 1 | 24.0-26.0 | 19.0-22.0 | 0,75 | |||
| TP310H | S3109 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 24.0-26.0 | 19.0-22.0 | ||||
| TP310Cb | S31040 | 0.08 | 2 | 0.045 | 0.03 | 1 | 24.0-26.0 | 19.0-22.0 | 0,75 | 10xC min | ||
| 1.10 max | ||||||||||||
| TP310HCb | S31041 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 24.0-26.0 | 19.0-22.0 | 0,75 | 10xC min | ||
| 1.10 max | ||||||||||||
| TP316 | S3160 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |||
| TP316L | S31603 | 0.035 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | |||
| TP316H | S31609 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |||
| TP316Ti | S31635 | 0.08 | 2 | 0.045 | 0.03 | 0,75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 5x | 0.1 | |
| (CN) | ||||||||||||
| -0.7 | ||||||||||||
| TP316N | S31651 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0,10-0,16 | ||
| TP316LN | S31653 | 0.035 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | 0,10-0,16 | ||
| TP317 | S3170 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 10.0-14.0 | 3.0-4.0 | |||
| TP317L | S31703 | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | |||
| TP321 | S3210 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | 0.1 | |||
| TP321H | S32109 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | 0.1 | |||
| TP347 | S3470 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | ||||
| TP347H | S34709 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | ||||
| TP347LN | S34751 | 0,05-0,02 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | 0.20- | 0,06-0,10 | ||
| 50 | ||||||||||||
| TP348 | S3480 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | ||||
| TP348H | S34809 | 0,04-0,10 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-13.0 | ||||
